Digilent 410-044-10P-KIT Manual do Utilizador Página 51

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 64
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 50
Spartan-3 Starter Kit Board User Guide www.xilinx.com 51
UG130 (v1.1) May 13, 2005 1-800-255-7778
Expansion Connectors
R
B1 Connector Pinout
The B1 expansion connector is located on the right edge of the board, as indicated by in
Figure 1-2. Table 13-4 provides the pinout for the B1 connector. The FPGA connections are
specified in parentheses.
Most of the B1 expansion connector pins connect only with the FPGA and are not shared.
Pins 36 through 40 include the signals required to configure the FPGA in Master or Slave
Serial mode. These same pins plus pins 5, 7, 9, 11, 13, 15, 17, 19, and 20 provide the signals
required to configure the FPGA in Master or Slave Parallel mode.
19
Table 13-4:
Pinout for B1 Expansion Connector
Schematic Name FPGA Pin Connector FPGA Pin Schematic Name
GND 1 2 VU (+5V)
V
CCO
(+3.3V) V
CCO
(all banks) 3 4 (C10) PB-ADR0
PB-DB0 (T3)
FPGA RD_WR_B config
5 6
(E10) PB-ADR1
PB-DB1 (N11)
FPGA D1 config
7 8
(C11) PB-ADR2
PB-DB2 (P10)
FPGA D2 config
9 10
(D11) PB-ADR3
PB-DB3 (R10)
FPGA D3 config
11 12
(C12) PB-ADR4
PB-DB4 (T7)
FPGA D4 config
13 14
(D12) PB-ADR5
PB-DB5 (R7)
FPGA D5 config
15 16
(E11) PB-WE
PB-DB6 (N6)
FPGA D6 config
17 18
(B16) PB-OE
PB-DB7 (M6)
FPGA D7 config
19 20
(R3)
FPGA CS_B config
PB-CS
PB-CLK (C15) 21 22 (C16) MB1-DB0
MB1-DB1 (D15) 23 24 (D16) MB1-DB2
MB1-DB3 (E15) 25 26 (E16) MB1-DB4
MB1-DB5 (F15) 27 28 (G15) MB1-DB6
MB1-DB7 (G16) 29 30 (H15) MB1-ASTB
MB1-DSTB (H16) 31 32 (J16) MB1-WRITE
MB1-WAIT (K16) 33 34 (K15) MB1-RESET
MB1-INT (L15)
35 36
(B3)
FPGA PROG_B
PROG-B
DONE (R14)
FPGA DONE
37 38
(N9)
FPGA INIT_B
INIT
CCLK (T15)
FPGA CCLK
Connects to (A14) via
390 resistor
39 40
(M11) DIN
Vista de página 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 63 64

Comentários a estes Manuais

Sem comentários